We usually refer to the hydraulic station actually refers to the hydraulic pump station. Hydraulic station is an important part of hydraulic system (power source). It provides the working medium of certain pressure and flow to the hydraulic system. Installing the necessary hydraulic valve on the hydraulic station can directly control the operation of the hydraulic actuator. To summarize and analyze the technical requirements for assembling Rexroth plunger pump hydraulic station: Rexroth plunger pump hydraulic station is composed of pump device, manifold block or valve combination, oil tank and electric box, and the functions of each part are as follows: Rexroth plunger pump device is equipped with electric machine and oil pump, which is the power source of hydraulic station and converts mechanical energy into power energy of hydraulic oil. Manifold block is composed of hydraulic valve and passage body. It regulates the direction, pressure and flow of hydraulic oil. Valve combination: the plate valve is installed on the vertical plate and connected with the pipe after the plate, which has the same function as the manifold block. Oil tank is a semi closed container welded with steel plate, and equipped with oil filter net and air filter, which is used to store oil, cool oil and filter oil. Electrical box: there are two forms: one is the terminal board with external leads; the other is equipped with a complete set of control appliances. (1) motor and gear pump provide driving force for hydraulic system. Technical requirements of Rexroth plunger pump hydraulic station; 1. Yyz-20ta (for CAK series CNC lathe);
Related products: